Agilent Technologies TwisTorr 304 FS AG Notice De Mode D'emploi page 219

Pins Name
2-1 Programmable
Analog Output
9-1 Frequency
Analog Output
TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01 (E)
Description
Programmable analog output.
Can be related to : frequency,
power, pump temperature
(linear) or pressure read
by the external gauge.
The setting can be done by:
front panel or serial line
(win.111).
0V = 0Hz, 0W, 0°C
10V = 1010Hz, 150W, 100°C
See following chart for more
details
Analog output proportional to
frequency (linear).
0V = 0Hz
10V = 1010Hz
When the analog output is set to provide pressure signal, the
voltage level is proportional to pressure level and it is generated
by control unit elaborating the independent input by the active
gauge.
Technical Information
Controller Connection
Electrical Note
Optically isolated Connect a 100kohm
Rload, min = 10kohm resistor between the
Ripple Vpp,max = 2 pins before
200mV measuring voltage
Precision = 5%
Resolution = 40mV
Pin-1negative
Pin-2 positive
Optically isolated
Rload, min = 10kohm
Ripple Vpp,max =
200mV
Precision = 1%
Resolution = 40mV
Pin-1negative
Pin-9 positive
17
219/301