Agilent Technologies TwisTorr 304 FS AG Notice De Mode D'emploi page 274

17 Technical Information
Programming


274/301
GAS TYPE : sets the gas type:
0 : not configured
1 : Nitrogen
2 : Argon
3 : Idrogen
4 : Other
CORRECTION : if it is selected the gas type 4 (Other) you
can set the correction factor of the pressure measurement
for this kind of gas. The pressure indicated by the
instrument is equal to:
P indicated = P measured x Gas correction / 10
TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01 (E)