Safety Instructions - Ibiza Light LLS500RGB-FX Manuel D'utilisation

Safety Instructions

Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Always make sure that you are connecting to the proper voltage.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
• Always disconnect from power source before servicing or cleaning.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
Only use the supplied transformer with the light strip. Do not connect the supplied transformer to another luminaire.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
Content of the set:
-LED strip fitted with 150 LEDs, 5m length
-Remote control
-Power supply 220-240Vac/12Vdc
OPERATION
Plug one end of the supplied transformer to the mains adaptor and the other end into the socket of the light strip.
Plug the mains adaptor into an outlet that delivers a voltage of 220-240Vac 50/60Hz.
Remote control
1 ON/OFF switch
2 During dynamic pattern mode = speed adjustment;
During static pattern: brightness adjustment;
White light mode: color temperature setting
3 Number of pixels
4 Press until you get the desired color (7 available)
5 RGB 3 color combinations
6 7 colors combination
7 16 colors combination
8 White, 5 levels of color temperature
9 Automatic mode: all patterns are played in
sequence
10 Various patterns
©Copyright LOTRONIC 2017
GB
Specifications
Input voltage: .................... 220-240V / 50-60Hz
Output voltage ......................................... 12Vdc
Light source .................................. 150 RGBLEDs
LLS500RGB-FX Page 3