Meanings Of Symbols - HIKOKI RB 27EAP Mode D'emploi

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Blower
It is important that you read, fully understand
before use, and observe the following safety
precautions and warnings. Careless or improper
use of the unit may cause serious or fatal injury.
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Always wear eye, head and ear protectors when
using this unit.
Choke – Run position (Open)
Choke – Start position (Closed)
START
On/Start
STOP Off /Stop
WARNING
Keep hands off from rotating fan.
WARNING
Hot surfaces; The muffl er and surrounding
cover may become extremely hot. Always keep
clear of exhaust and muffl er area, otherwise
serious personal injury may occur.
Keep all children, bystanders and helpers 15 m
away from the unit. If anyone approaches you,
stop the engine immediately.
Fuel and oil mixture
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".
NOTE: Equivalent noise level / vibration level are calculated as the time-weighted energy total for noise / vibration levels
under various working conditions with the following time distribution:
* 1/7 Idle, 6/7 racing.
(Original instructions)
DANGER
DANGER
Idle speed adjustment
Priming pump
Guaranteed sound power level
Displacement
Spark plug
Fuel tank capacity
Dry weight (without fuel, with all pipe)
L
Sound pressure level LpA by ISO 22868
pA, eq
Equivalent*
ISO22868
Measured sound power level LwA by 2000/14/
L
WA, Ra(M)
EC
2000/14/EC Racing
Guaranteed sound power level LwA by
L
WA, Ra(G)
2000/14/EC
2000/14/EC
Racing
Vibration level by ISO 22867
a
hv, eq
Equivalent*
K
Uncertainty
5
English