Low Voltage Protection; Temperature Protection; Temperature Alarm - InnoCigs SC iStick Melo Manuel D'utilisateur

SC ISTICK MELO – ERROR MESSAGES & PROTECTIONS
Over 10 sec� Protection
If you hold the Fire button down for more than 10 seconds, the device will turn off automatically� The display will
show "Over 10s Protection"�
Atomizer low Alarm
If the resistance of the coil drops below 0�1 ohm in VW or Bypass mode, or below 0�05 ohm in TC mode,
"Atomizer Low" will show on the display�
Excess Voltage Protection & no Atomizer Head detected
If there is excess voltage on the vaporizer, the display will show "Atomizer Short"� "No Atomizer Found" will show
on the display if no atomizer is connected�

Low Voltage Protection

If the battery voltage drops below 3�1 volts, the display will first show "Battery Low", then "Lock"� Charge the
battery to unlock the device�

Temperature Protection

Once the coil reaches the target temperature in TC mode, the screen will show "Temp Protection"� You can
continue to use the device as normal�

Temperature Alarm

If the device temperature is above the alarm temperature, the device will automatically switch off and the display
will show "Device Too Hot"� You can continue vaping after the device has cooled off�
56