Bosch PAM21011 Mode D'emploi page 42

Use the "+" and "–" keys to select the
"Start" function , (see "+" and "–" keys).
Use the "down" key (see "Up" and "down"
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
Press the "u p" key again to position the
cursor on the timer menu. Use the "+" and "–"
keys to select the "S t a r t" / "S t o p" f u n c t i o n .
(see "+" and "–" k e y s ) .
Use the "down" key to position the cursor
on the stop time menu. Then use the "+"
and "–" keys to modify the stop time until the
desired time is reached.
The time changes 15 minutes at a time.
Instructions for Use
Press the "Timer" key
seconds without touching any keys to
memorise the set start / stop times.
The set time is displayed on the screen.
Programming the appliance stop time
Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
42
, or wait for 10
10 sec/
, to position the