Table des Matières
Publicité
Follow instructions for use
Defibrillation-proof type CF
applied part
Direct current
Class II equipment
Recycle electronic
equipment
Australian Radio
Communications License
INMETRO
For more information see, HCBGregulatory.3M.com
Explanation of signal word consequences
WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE: Indicates a situation which, if not avoided, could result in property damage only.
WARNING: To reduce the risks associated with access to critical patient information or equipment:
•
The control unit is to be attached to other equipment by authorized service personnel only.
•
Do not re-install or re-locate the control unit.
WARNING: To reduce the risks associated with hazardous voltage, fire, and thermal energy hazards:
•
Use ONLY Bair Hugger temperature monitoring system components (sensors, cables, and power supply). Do
not substitute other devices for the control unit, sensor, cables, or power supply.
•
Do not use the Bair Hugger temperature monitoring system (sensor, control unit, cables, or cords) in an
MRI environment.
•
Do not connect the monitor output of the device to a non-CF rated monitor input.
WARNING: To reduce the risks associated with hazardous voltage and fire:
•
Always keep power supply visible and accessible. The plug on the power supply serves as the disconnect
device. The power outlet shall be as close as practical and shall be easily accessible.
•
Use only the power supply specified for this product and certified for the country of use.
•
Use only a properly grounded power outlet; do not use extension cords or multiple portable socket outlets.
•
Do not allow the power supply to get wet.
•
Do not use the control unit when it appears the unit or system components are damaged. Contact your local
3M technical support representative.
•
Do not service or modify the power supply, control unit, cables, sensor, or any part of the temperature
monitoring system. There are no user serviceable parts.
WARNING: To reduce the risks associated with fire:
•
The temperature monitoring system is not suitable for use in the presence of a flammable anesthetic mixture
with air nitrous oxide.
WARNING: To reduce the risks associated with pressure, and crushed or entangled cords and connectors:
•
Do not allow the patient to lie on any sensor cable or connector.
•
Always position cables and cords away from the patient's body.
To signify that the instructions for use must be followed. Source: ISO 7010-M002
To identify a defibrillation-proof type CF applied part complying with IEC 60601-
1. Source: IEC 60417-5336
To indicate on the rating plate that the equipment is suitable for direct current
only or to identify relevant terminals. Source: IEC 60417-5031
To identify equipment meeting the safety requirements for Class II equipment per
IEC 61140. Source: IEC/TR 60878
DO NOT throw this unit into a municipal trash bin when this unit has reached
the end of its lifetime. Please recycle. Source: Directive 2012/19/EC on waste
electrical and electronic equipment (WEEE)
Indicates product complies with applicable Australian regulatory requirements.
Source: AS/NZS 4417.1:2012
.Indicates product complies with the Brazilian standards
3
Publicité
Chapitres
Table des Matières
Dépannage
