Ensure the exhaust ducting selected for installation complies with relevant standards
and is fire retardant.
WARNING:
Start Using Your Cooker Hood
Push button
a.
Press the button "Stop", the motor is stopped then.
b.
Press the button "Low", the motor is running at low speed.
c.
Press the button "Mid", the motor is running at medium speed.
d.
Press the button "High", the motor is running at high speed.
e.
Press the button "Light", both lights start shining .Press the button again; the
lights are switched off then.
TROUBLESHOOTING
Fault
Light on, but
motor does not
work
For safety reason, please use only the same
size of fixing or mounting screw which are
recommended in this instruction manual.
Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
Select a fan switch position.
Contact service center.
Contact service center.
20
Solution