Charging Mode - NORAUTO ESSENTIAL Mode D'emploi

PART 2
Under Load (accessories ON): Next, load the alternator by turning on as many accessories as
possible (Front light, wiper blade, A/C, fan, etc.). This test under load allows you to check if the
alternator is able to supply enough current together to the battery and electrical accessories of your
car.
Refer to the operation as described above.
Notes: Press any buttons during alternator checking process, the unit will go to the
corresponding mode.
The unit may detect that the alternator is out of typical voltage range because someone has
added a number of accessory loads on the charging system, thereby increasing current
demand from the alternator.
MAKE SURE THAT THE ALTERNATOR IS RATED TO SUPPORT THE APPLICATION.
This check may not be accurate for every make, manufacturer and model of car.
Check only 12 volt systems.
During Battery Charging

CHARGING MODE

ICON on LCD
* Current and voltage displays
alternatively for every
3 seconds
MODEL
Corresponding
Charging mode
Floating
Charging mode
Alternator Check
mode
134
Explanation
Charging with a proper current and voltage
according to the battery type selected.
Monitors the battery voltage and charges as
necessary to assure the battery maintains
full capacity.
Checking the alternator.