Problem-Solving; Maintenance; Warranty - Lumie Arabica Guide D'utilisation

English
Problem solving
The light is less bright or doesn't come on at all
One or both of the bulbs may have failed. Switch off and unplug the
lightbox. Let it cool if necessary.
Remove the plastic screen by gently pulling it away from the top of
the unit; it unhooks at the bottom.
Check that the bulbs are firmly in the sockets. If you have to adjust
them, plug in the lightbox and switch on afterwards to see if this
has worked.
The bulbs are firmly in place but it hasn't fixed the problem
If neither bulb is working, check the fuses (see below). If the fuses
are OK, then you may need to replace the bulb(s).
To remove a bulb, push the red button down hard and slide the bulb
out of the socket.
Gently slide the replacement bulb into the socket until it clicks into
position.
I've replaced the bulbs but it's still not working
Check the internal fuse below the on/off switch – it will be obvious
if this has blown. Replace with a 5x20mm cartridge fuse, type
F3.15AH250V.
It is also possible that the plug fuse might have blown.
The correct fuse is a 3A fuse to BS1362.
If your Arabica keeps blowing fuses, there is a problem and you
should contact us.
If this doesn't work or if you have any other problems with your
Arabica, please call Lumie.
Do NOT remove the reflector as there are no user-serviceable parts
under the reflector.
8 | www.lumie.com
English

Maintenance

Replacement bulbs
The bulbs will slowly lose their brightness so, to maintain maximum
output and benefit, we recommend you replace them every two to
three years. Replacements are available from Lumie.
Cleaning
Clean only with a dry or lightly moistened cloth.

Warranty

This unit is covered under warranty against any manufacturing
defect for three years from the date of purchase. This is in addition
to your statutory rights. If possible, use the original packaging
(including internal pieces) to return your Arabica for service. Make
sure the plug is prevented from moving in transit and damaging the
unit. If the unit is received damaged, through misuse or accidental
damage, then we may have to charge to repair it; we will contact
you first. Please call Lumie for further advice.
www.lumie.com | 9