Maintenance - Life & Mobility MATCH AURA Mode D'emploi

Inspired by life
Use
In order to drive again you should do the
following:
1. Take the plug out of the wall socket.
2. Disconnect the battery charger from the
wheelchair.
3. Switch the push support off and then on
again.
EN22
3
Battery less than 10% full
3
Charger connected and push
assist activated

Maintenance

Cleaning
During cleaning of the wheelchair the electronic
components must not become wet. This concerns
particularly the control on the handle, the box under
the seat and the motors in the wheels. These may only
be cleaned with a damp cloth.
Please see the manual concerned for permitted
cleaning products for the wheelchair.
Be careful:
• As the Aura push assist is splash-proof, the
wheelchair should never be sprayed with a
high-pressure cleaner or hosepipe.
Tip:
• Clean the wheelchair's removable parts, such
as seat, back support, arm rests etc. away from
the wheelchair. This is a simple way to prevent
that the control components become wet.
Minor maintenance
The push assist itself does not require any
maintenance. Other maintenance is stated in the
wheelchair manual.
EN23