Sony CDX-GT710 Mode D'emploi page 9

G RESET button (Location behind the front
panel) 4
H Disc slot 6
To insert the disc.
I Display window
J Z (eject)/ANGLE button 7
To eject the disc/slide down the front panel
(press); angle the front panel in 3 positions
(press and hold).
K
(front panel release) button 5
L SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /AUX).
M LIST button 11, 15
To list up.
N DSPL (Display)/PTY (Program Type)
button 12
To change display items/select PTY in RDS.
O Number buttons
CD/MD* 1 :
(1): REP 10, 15
(2): SHUF 10, 15
(3)/(4): GP*
3 /ALBM*
To skip albums (press); skip albums
continuously (press and hold).*
(5): BBE MP 2
To activate the BBE MP function, set
"BBE MP on." To cancel, set "BBE MP
off."
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
P AF (Alternative Frequencies)/TA
(Traffic Announcement) button 11
To set AF and TA in RDS.
Q OFF button
To power off; stop the source.
R AUX input jack 14
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
4 –/+
5
ql ENTER button
To complete a setting.
w; </, (SEEK –/+) buttons
CD/MD* 1 :
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
wa VOL (volume) +/– button
To adjust volume.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd SOUND button
To enter sound setting.
wf M/m (+/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
wg SCRL (scroll) button 10
To scroll the display item.
wh Number buttons
CD/MD* 1 :
(1): REP 10, 15
(2): SHUF 10, 15
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an ATRAC CD is played.
*4 When an MP3/WMA/AAC is played.
*5 If the changer is connected, the operation is
different, see page 15.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 18.
9