Sony DPP-MS300 Mode D'emploi page 45

• In the following cases, the stored data may be
damaged or erased:
– when turning off the power of the printer or when
removing the "Memory Stick" from the insertion
slot while the printer is accessing the "Memory
Stick."
– when using the "Memory Stick" near magnets or
magnetic fields
To protect images
To prevent accidental erasure of important image data,
use the write protect switch on the "Memory Stick."
Slide the switch to the write protect or write enable
position:
Write enable position
Slide the switch left to the write enable position.
You can read, write and delete data on the
"Memory Stick." Formatting the "Memory Stick" is
also enabled. When storing video pictures on the
"Memory Stick," set the switch to the write enable
position.
Write protect position
Slide the switch right to the write protect position.
It is now impossible to write or delete the data on
the "Memory Stick." We suggest you set the switch
to the write protect position while just viewing the
"Memory Stick" images.
Connector
Place the
label here
Write enable
Write protect
position
position
LOCK LOCK
For Your Information
45 GB