Vox DelayLab Manuel D'utilisation page 17

Effect Type: MODULATION
You can add modulation effects to the delay sound.
1. Standard: Modulated Delay
With this setting, modulation is applied to the delay time.
You can use it as a chorus and flanger by setting a short
delay time.
2. Vintage: Filter Delay
This setting is a delay that has a filter.
3. Custom: Phaser Delay
This setting is a delay that has a phaser arranged in the
feedback loop. You can produce complex sound images
by increasing the feedback.
Effect Type: STEREO
This is an effect that expands mono guitar inputs to the left
and right. Use this effect with stereo outputs.
1. Standard: Cross Delay
This setting is a delay that performs cross feedback from
left to right and right to left.
2. Vintage: Panning Delay
This setting is a delay that performs panning of the
normal position of the delay sound from the left and
right.
3. Custom: Left Center Right Delay
This setting is a multi tap delay that outputs 3 taps to the
left, center and right.
Effect Type: AMBIENT
The sound is delayed, and then a reverb effect is additionally
applied, producing a deeply reverberant sound.
1 . Standard: Space Delay
With this setting you can obtain unheard of sounds that
expand into space.
2 . Vintage: Reverb Delay
This setting achieves the sound of a large space with
rebounding reflections of the original tone.
3 . Custom: Early Reflections Delay
This is a delay that adds the initial reflected effect.
You can apply a reverberant sound without drastically
changing the tone quality.
Space Delay and Reverb Delay are effects combined
TIP:
with 3 factors including reverb, delay and pitch
shifter. If TIME is shortened, PITCH is set to +12 and
FEEDBACK is increased, you can obtain reverberant
sounds similar to string sounds. If TIME is 10 ms or less,
PITCH is 0 and FEEDBACK is raised, natural reverb is
produced that is suitable for a broad range of music.
Effect Type: REVERSE
This is a reverse delay that plays the delay sound in the
reverse direction. To change the head position of the reverse
delay play, set FWD/RVS to (FWD 100%) and raise the
parameter of the FWD/RVS to the preferred timing.
1 . Standard: Reverse Stereo Delay
This setting produces a more complicated effect by setting
the delay time separately on the left and right.
17