Wr2 Components; Wr2 Benefits; Mounting The Controller Interface - Rain Bird WR2 Manuel De L'utilisateur

WR2 Components

■
1
Controller Interface
■
2
Sensor
■
3
Battery Cassette and
Lithium CR2032 Battery
■
4
Sensor Mounting Bracket Assembly
■
5
Mounting Hardware
■
6
User's Manual
■
7
Quick Reference Guides
■
8
WR2 Quick Reference Labels
■
2
■
3
■
4
■
5
■
7
NOTE: Tools needed for installation: drill, drill
bit, and Phillip's head screwdriver
2
WR2 Wireless Sensor • www.rainbird.com/WR2
WR2 user manual (637469-01) EN ESMX FRCA.indd 2
■
1
■
6
■
8

WR2 Benefits

• All settings are programmed through the
Controller Interface device
• Large easy to understand icons communicate
irrigation mode and sensor status
• Sensor LED indicator enables one-person
setup, reducing installation time
• Battery is easy to install / replace
• Aesthetic appearance - no external antennas
• Easy to install, self-levelling sensor bracket
mounts to flat surfaces or rain gutters
• "Quick Shut Off " interrupts active irrigation
cycle during a rain event
• Enhanced antenna array provides superior
signal reliability that overcomes most line
of sight obstructions
Mounting the
Controller Interface
Choose a location near the
irrigation controller / timer.
!
The cable harness is 30
inches (76.2 cm) long, so
before mounting the device,
ensure the wires easily reach
the irrigation controller's
connection terminals.
• Select a flat surface adjacent
to the irrigation controller.
• For best performance, the
Controller Interface should
be installed at least five feet
(1.5m) above the ground.
• It is recommended that
the Controller Interface be
installed away from sources of
electrical interference (such
as transformers, generators, pumps, fans,
electrical meter boxes) and metal objects to
maximize communication range.
• Use the mounting hardware supplied.
Attach the Controller Interface to the wall.
2/23/2018 8:09:24 AM