Adjusting Cutting Height; Starting The Engine; With Recoil Starter; With E-Start - Zipper Maschinen ZI-BRM52EST Manuel D'utilisation

17.3.2 Adjusting cutting height

17.3.3 Starting the engine

17.3.4 Stopping the engine

17.3.5 Activating and de-activating the wheel drive

ZIPPER MASCHINEN GmbH
ZI-BRM52EST
The cutting height is set centrally with one lever
1. Pull the cutting height lever sideways
2. Push the lever in desired positon and allow the lever to
engage into one of the slots
Lower position: 25mm
Upper position: 70mm

With Recoil starter

 Pull the engine lever against the push handle.
 Pull out the starter handle briskly
 Guide the starter-handle slowly to the rope guide back as soon
as the engine starts.

With E-Start

 Opening the battery drawer
 Place the charged battery on the insertion grooves and push it
in until the battery clicks into place
 Closing the battery drawer
 Pull the engine start bracket to the handle
 Press E-start button until engine starts
 Release the E-start button when the engine is running
 Release the engine lever to stop the engine and the blades
Wheel drive activating
 Press the drive lever to the push handle and the mower will
move forward when the engine is
Wheel drive de-activating
 Antriebsbügel (2) loslassen und der Radantrieb wird
deaktiviert.
www.Zipper-Maschinen.at
OPERATION
running.
30