Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting the System
Connecting the multi-channel processor
Note:
When Pioneer multi-channel processor (sold separately) is
connected to this navigation system, make sure the "5.1 Ch
Setup" mode is activated. Please find the correct setting by
referring to "Switching the 5.1ch setting" in the Operation
Manual of the navigation system.
Secure the connector using the screw
supplied with multi-channel processor.
RCA
connector 1
9
Blue
Blue
(GUIDE SP OUT)
RCA connector 2
Black
Optical cable connection box
(supplied with multi-channel processor)
23 cm (9 in.)
The navigation unit
Light Gray
(DIGITAL OUTPUT)
Yellow/black (GUIDE ON)
When combining this navigation unit
with the multi-channel processor system,
connect this lead to yellow/black lead on
the multi-channel processor controller
unit. In this way, when the mute signal is
output from this navigation system, the
audio volume is automatically muted or
attunated.
20 cm (7-7/8 in.)
Guide speaker
(e.g. CD-TS37GP)
(sold separatly)
Publicité
Chapitres
Table des Matières
