' &
Procedures in the event of faults
The device is maintenance-free. However, if any faults do occur, please
proceed as follows.
Fault
Action
The battery is not
Check all connections from the power supply to the
being charged.
battery. Pay attention to the correct polarity. Remove the
mains plug from the device and plug it back in. Check the
fuses and the mains connection.
The voltage of the
Start the motor and let it run for approx. 30 seconds.
battery has
Battery voltage rises above 1.5 volt. The charging process
dropped below
starts automatically.
1.5 volt.
The battery II is
Check the fuses.
not charged during
driving operation.
The maximum
The device overheats. Ensure better ventilation of the
charging current is
device.
not reached.
None of the faults
Please contact the manufacturer:
described here
Trautmann GmbH & Co. KG
seems to apply.
CALIRA-Apparatebau
But the device still
Lerchenfeldstr. 9
does not work.
D-87600 Kaufbeuren
Service telephone: 0190 / 77 03 80
Internet:
e-mail: info@calira.de
44
! "# $
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
"
(1.24 /min)
%&&