Connection To The Fresh Water Tank; Connection To The Waste Water Tank; Temperature Sensor, Battery Changeover Switch - Calira EVS 38/20-DS/IU Mode D'emploi

' &

Connection to the fresh water tank

Plug the 5-pole flat cable into your fresh water tank. The assignation of the
contacts is according to the following list:
Terminal 1 Com.
Terminal 2 1/4
Terminal 3 1/2
Terminal 4 3/4
Terminal 5 1/1
Fig. 8: 5-pole connector

Connection to the waste water tank

Plug the 2-pole flat cable into your waste water tank. The assignation of the
contacts is according to the following list:
Terminal 1 Com.
Terminal 2 3/4
Fig. 9: 2-pole connector
Temperature sensor, changeover switch battery type
If you are using a temperature sensor for the battery II,
fasten the temperature sensor to the face of the battery II
(supply battery). To do so, remove the protective plastic
Fig. 10
film from the Velcro strip of the temperature sensor
fixture and press it firmly to the desired position on
battery II (see description of temperature sensor).
Connect the cable of the temperature sensor to the
temperature sensor
connection) of the device.
! "# $
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
"
connection (fig. 10, 2-pole
37
%&&