Cable Lengths And Cross-Sections; Connection To The Control Panel - Calira EVS 38/20-DS/IU Mode D'emploi

' &

Cable lengths and cross-sections

Only use the specified cross-sections!
12-pole plug connector
Battery I positive pole For length of up to 3 m, cable cross-section 10 mm².
Charging cable red For length of up to 6 m, cable cross-section 10 mm².
Length over 6 m, cable cross section 16 mm².
Battery II positive pole For length of up to 6 m, cable cross-section 10 mm².
Charging / supply cable
red
Battery II negative pole For length of up to 6 m, cable cross-section 10 mm².
Charging / supply cable
blue
Connection
Disconnect the power cables from the battery
and from the mains before connecting /
disconnecting any cables!

Connection to the control panel

12-pole flat plug
Plug the 12-pole flat cable into your control panel. The assignation of the
contacts is according to the following list:
Terminal 1 Negative connection
Terminal 2 + Test connection for battery II
Terminal 3 + Test connection for battery I
Terminal 4 Control connection for user relay
! "# $
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
"
Fig. 6: 12-pole connector
%&&
35