Pentair Raychem HWAT-T55 Manuel D'utilisation page 11

sP 3 : Pre-set-teMPerAtures
3 pre-set-temperatures can be modified.
Temperature range: 40°C - 60 °C
Values can be changed by pressing arrow button up or down
sP 4 : sensor Probe correction
The sensor probe output readings can be corrected
from -10 K to +10 K.
example:
The real pipe temperature , measured with external
thermometer device, is 55°C. The display of the
HWAT-T55 shows only 53°C. A sensor correction of
+2K is needed.
Values can be changed by pressing arrow button up or down
Thermal Building SoluTionS
11