brondell FreshSpa Warm FSW-20 Guide D'utilisation page 8

Installation
2) Turn Off Water Supply Valve and Flush Toilet
a. Turn off water supply at the wall to stop
flow of water .
b. Flush toilet and hold down handle to
completely empty toilet tank .
c. Disconnect water supply hose from
water shut off valve . You may have to use
a 3/8'' compatible wrench or a similar tool
if the connection is tight (not supplied) .
3) Connect T-valve to Supply Line
a. Install the Cold Water T-valve and the
small rubber washer onto the shut off
valve coming out of the wall .
b. Connect the water supply line to the open
end of the T-valve using the second small
rubber washer (if needed) .
6
Step 2a
Step 2c
Step 3a & 3b