ADVANCED MENU
VOICE MENU
In this menu you can enable the voice menu, which enables the system
to be managed remotely by telephone. For the functions available in
this section, see next paragraph.
EN
MANAGE CODES
In this menu you can modify the enable function and the user PIN codes
enabled in the same partitions as login code.
MANAGE KEYS
In this menu it is possible to modify the enable function of keys enabled
in the same partition as login code.
MANAGE REMOTE COMMANDS
In this menu it is possible to modify the enable function of remote com-
mands enabled in the same partition as login code.
WLS ALARM LED
This menu allows to enable the signalisation LED present on wireless
devices. If enabled, the LED turns on any time the detector is violeted.
By this way, the user can check the detectors status in any moment. This
optical signalisation is automatically disabled after 10 min.
REPLACE LEXAN
This menu allows the colour lexan layer of the keyboard to be replaced
without triggering a tampering alarm. To open and close the cover, you
should follow the instructions provided in the keyboard manual.
OPERATIONS WITH KEY
The transponder key or your own NFC telephone can be used instead
of the keyboard keys to activate the codes: to access the user menu,
bring a valid key near the reading zone of the keyboard (located at
top right).
24
lares