Micro-Massage; Maintenance - Imetec L6801 Mode D'emploi

EN
• Dab the face.
ACTIVATION
• Apply the sponge (6) to the attachment area (1A) after cleansing
the face.
• Apply the cosmetic treatment usually used to the area to be treated.
• Switch the appliance on by pressing the on/off button (1C) and
select the desired vibration intensity: you will hear a beep and
the appliance will start to vibrate.
• Slide the sponge (6) on the different areas with gentle circular
movements to facilitate absorption of the cosmetic product.

MICRO-MASSAGE

If you prefer a more intense massage:
• Apply the micro-massager (7) to the attachment area (1A) after
having cleansed the face.
• Apply the cosmetic treatment usually used to the area to be treated.
• Switch the appliance on by pressing the on/off button (1C) and
select the desired vibration intensity: you will hear a beep and
the appliance will start to vibrate.
• Slide the micro-massager (7) on the different areas with gentle
circular movements (with no pressure at all) to facilitate absorption
of the specific cosmetic product and stimulate micro-circulation.
After each use you must clean it.
Brushes, Sponge, Micro-massager (3,4,5,6,7):
• Wash with warm water and neutral soap.
• Remove the excess water with a soft, clean and dry cloth.
• Let the accessories dry completely before putting them away.
Handpiece (1):
42

MAINTENANCE