Useful Tips - Imetec L6801 Mode D'emploi

EN
It is recommended to slide the preset brush on different areas of the
face with gentle circular movements, without pressing excessively and
always in the following order:
• forehead
• nose and chin
• cheek
• cheek
• neck and neckline.
The appliance can also be used in the shower and bath.
TIMER
The device is equipped with a built-in timer that beeps to tell you to
move from one part of the treatment area to another. The timer is
programmed to treat:
• 20 seconds on the forehead
• 20 seconds on the nose and chin
• 10 seconds on each cheek
• 20 seconds on the neck and neckline.
After 1 minute and 20 seconds of operation, the appliance will switch
off automatically. It is still possible to switch the appliance off at any
time before it does so automatically.
INTENSITY OF VIBRATION
The appliance has 2 vibration intensities that are to be selected as
required.
• Intensity 1 (low) is automatically activated when the appliance
is switched on; the operating LED (1B) lights up with a constant
dim glow.
• Intensity 2 (high) is active when the appliance is on by pressing
the On/Off (1C) button again: the operating LED (1B) lights up
with a constant intense glow.
40

USEFUL TIPS