Dcf Reception; Time Zone Setting - TFA TWIST Mode D'emploi

TFA_No. 60.2560_Anleitung_ 23.12.2020
TWIST – Radio-controlled alarm clock

6.1.1 DCF reception

• By default, the DCF reception is activated (dcF on) and after successful reception of the DCF sig-
nal no manual adjustment is necessary.
• Once the DCF time reception is deactivated (dcF OFF) the clock must be manually set.
• If the DCF reception is activated, the manually set time will be overwritten by the DCF time when
the signal is received successfully.

6.1.2 Time zone setting

• In the setting mode you can make the time zone correction
• The time zone correction is needed for countries where the DCF signal can be received but the
time zone is different from the DCF time (e.g. +1=one hour plus).
7. Alarm time setting
• Turn the alarm clock to the Alarm ON position. The coloured marking
alarm symbol and the last adjusted alarm time appear on the display (6:00 default). The alarm is
activated.
38
17:11 Uhr Seite 20
points upwards. The
TWIST – Radio-controlled alarm clock
• Press the HR +/- button to set the hours and MIN +/- button to set the minutes.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The
alarm symbol flashes.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop. The alarm symbol remains on
the display and the alarm will be reactivated at the same time.
• Press the SNOOZE/LIGHT button to activate the snooze function.
• The backlight turns on for a short period. The alarm will be interrupted for the set time.
• The snooze symbol flashes.
• Turn the alarm clock to the Alarm OFF position to deactivate the alarm. The marking
upwards. The alarm symbol and the alarm time disappear.
8. Illumination
• The display automatically inverts and the numbers light up on a black background when illumi-
nated.
• Pressing the sensor button on the top activates a bright illumination for 5 seconds.
points
39