Timex LCD Analog Mode D'emploi page 2

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours... Payment must be made
within 30 days of purchase... Name, address, telephone number, purchase date,
and 5-digit model number required... You can also mail a check for $5 to: Timex
Extended Warranty, P...O... Box 1676, Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch...
FEATURES AND BASIC OPERATIONS
1... LCD Analog (Hands) and Digital Timekeeping with Hours, Minutes,
Seconds – AM/PM/24-Hour Format
2... Daily Alarm and Hourly Chime
3... 24-Hour Stopwatch with Split time
4... 60-Minute Countdown Timer
5... Dual Time (2nd Time Zone)
LIGHT
MODE
Button functions shown
TIME
To set Time and Date
1... Press MODE repeatedly until the Time is shown with the Seconds flashing...
2... Press LAP/RESET to set Seconds to zero...
NOTE: If Seconds are greater than 30, the Minutes will increase by one...
3... Press START/STOP to set Minutes, as indicated by its flashing... Press
LAP/RESET to advance the Minutes setting... Press and hold to increment
quickly...
4... Press START/STOP to set Hours, as indicated by its flashing... Press
LAP/RESET to advance the Hours setting to AM or PM... Press and hold to
increment quickly...
NOTE: There is ONLY an indicator for PM hours...
5... Press START/STOP to set the Date (01-31), as indicated by its flashing...
Press LAP/RESET to advance the Date setting... Press and hold to
increment quickly...
6... Press START/STOP to set the Month number (01-12), as indicated by its
flashing... Press LAP/RESET to advance the Month setting... Press and hold
to increment quickly...
7... Press START/STOP to set the Day setting (SUN-SAT), as indicated by its
flashing... Press LAP/RESET to advance the Day setting... Press and hold to
increment quickly...
8... Press MODE to exit Time Set...
9... To switch from AM/PM to 24-Hour time format, press and hold START/
STOP for 4 seconds... Press and hold START/STOP for 4 seconds to
reverse the format change...
NOTE: A "24HR" indicator in the bottom right corner of the display confirms
the change... There is ONLY an indicator for PM hours...
DUAL TIME
To set the time for a Second Time Zone – shown on the LCD Analog watch
face
1... Press MODE until the indicator is next to the "DUAL T" on the display...
2... Press START/STOP... The Hour Hand on the watch face can be seen
flashing...
3... Press LAP/RESET to advance the Hour Hand around the watch face
setting to AM or PM... Press and hold to increment quickly...
NOTE: There is ONLY an indicator for PM hours...
4... Press START/STOP... The Minute Hand on the watch face can be seen
5... Press LAP/RESET to advance the Minute Hand around the watch face...
6... Press START/STOP to exit Dual Time Set, and the Second Hand will
®
ALARM
To turn on/off the Daily Alarm, or to turn on/off the Hourly Chime
1... Press MODE until the indicator is next to the "ALARM" on the display...
2... Press START/STOP and LAP/RESET simultaneously and repeatedly to
To set a Daily Alarm – shown on the LCD Analog watch face
1... Press MODE until the indicator is next to the "ALARM" on the display...
START/STOP
2... Press START/STOP... The Hour Hand on the watch face can be seen
LAP/RESET
3... Press LAP/RESET to advance the Hour Hand around the watch face
4... Press START/STOP... The Minute Hand on the watch face can be seen
5... Press LAP/RESET to advance the Minute Hand around the watch face...
6... Press START/STOP to exit Alarm Set mode...
7... When the alarm sounds, press ANY button to silence the alert, or it will stop
TIMER
To set a countdown for up to 60 minutes – shown on the LCD Analog watch
face
1... Press MODE until the indicator is next to the "TIMER" on the display... If the
2... Press LAP/RESET repeatedly to increase the number of Minutes for the
To use the countdown timer – shown on the LCD Analog watch face
1... Press MODE until the indicator is next to the "TIMER" on the display... If the
2... Press START/STOP to begin the countdown... The watch face will show
3... Press START/STOP to pause the timer...
4... Press START/STOP to resume the countdown, or press LAP/RESET to
5... When the countdown ends, the alert will sound for 5 seconds, or press ANY
STOPWATCH
Use this function for recording elapsed time up to 24 hours...
1... Press MODE until the indicator is next to the "STOP" on the display...
2... Press START/STOP to start the stopwatch... It will be shown in the lower
1
flashing...
Press and hold to increment quickly...
appear on the watch face...
NOTE: In Dual Time mode, the AM/PM indication is tied to the Analog time...
NOTE: The alarm setting is tied to the primary time zone...
enable the Alarm ( ), enable the Chime (
the Chime...
NOTE: You can turn the Alarm on/off without changing the Chime setting by
pressing LAP/RESET...
NOTE: The alarm setting is tied to the primary time zone
flashing...
setting to AM or PM... Press and hold to increment quickly...
NOTE: There is ONLY an indicator for PM hours...
flashing...
Press and hold to increment quickly...
after 20 seconds...
NOTE: The alarm will sound the next day at the same time unless you go
into Alarm Mode and press LAP/RESET to turn it off
Timer shows any previous setting, the indicator will flash...
countdown...
NOTE: If you go past the desired number of minutes, you will have to
continue to press LAP/RESET to wrap around the setting display...
Timer shows any previous setting, the indicator will flash...
NOTE: If no setting is shown, press LAP/RESET to restore the previously
set countdown (or refer to the Timer Set instructions)...
Seconds counting down along its outer edge...
reset the timer to its previous setting...
button to silence it...
NOTE: The alert will sound even if you are not in TIMER mode...
NOTE: The current time of day is shown on the LCD Analog watch face...
digital display...
ENGLISH 04K-096000-02
), disable the Alarm, and disable