Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
18.-
ANTI-STRESS.
Fatigue in the muscles and bones is relieved by
stretching of tendons in the back and ligaments at the
back of the knee, set to a default time of 15 minutes.
NOTE 1: If you have problems with your joints,
especially if they are located in the knee, we advise
NOT using the ANTI-STRESS program.
NOTE 2: The backrest and footrest will return to their
original position when this automatic program is
nearing completion.
AUTOMATIC PROGRAMS.- Localised.
These
programs
perform
massage
on
an
exact part of the
body to produce a
more
localised
effect.
Activating any of
the
4
automatic
localised programs
will initiate an Auto
scan of the entire
body, the machine
will
automatically
perform a height
scan of the user's
establishing a default massage time of 15 minutes.
The ARM/AIR air pressure On/Off key can be used in
any of the programs.
19.-
NECK/SHOULDER,
Automatic neck/shoulder program On/Off key.
Press this key once to switch on the automatic neck
and shoulder program massage functions. Press it
again to switch off the automatic program.
20.-
BACK/SEAT
Automatic back/seat program On/Off key.
Press this key once to switch on the automatic back
and seat program massage functions.
Press it again to switch off the automatic program.
21.-
LUMBAR
Automatic lumbar region program On/Off key.
Press this key once to switch on the lumbar program
massage functions.
Press it again to switch off the automatic program.
22.-
FEET/CALVES.
Automatic foot/calf program On/Off key.
Press this key once to switch on the automatic foot
and calf program massage functions.
Press it again to switch off the automatic program.
a
pinpoint
back,
23.-
INTENSITY; SPEED; STRENGTH.
Press this key to adjust the intensity, speed and
strength of the automatic localised program, when
activated, the force of all the massage techniques in
the selected program will be set in a circle.
You can choose from 3 settings by pressing the
INTENSITY; SPEED; STRENGTH key.
24.-
ARM AIR.
Air pressure in arm Start/Stop key.
The ARM/AIR air pressure On/Off key can be used in
any of the programs.
Press this key once to activate this function.
Press it again to switch it off.
MEMORISING PROGRAMS.-
25.-
– M1, M2, SYNC/MUSIC.
Equipped with three user defined memories.
The massage method can be chosen by adjusting the
combination of neck, shoulder, back, lumbar and leg
massage functions and also adjusting the massage
time. (Massage for approximately 1-30 minutes).
Programming memory M1:
A) When the massage chair is in standby mode,
press
and
hold
SYNC/MUSIC for three seconds (M1, for example),
the M1 key will flash, this means that the massage
chair is now in programming mode.
B) When
you
massage rollers move up and down to recheck the
height. After the automatic height detection, it is also
possible to adjust the height further by using the two
manual backrest up/down buttons
most comfortable type of massage.
After the final adjustment, the desired height setting
will be memorised in program M1.
C) After
the
NECK/SHOULDER will flash on the LCD, indicating
the neck/shoulder massage settings.
Adjust the time (1-10 minutes) using the up/down
control keys.
If you decide not to massage these body parts, the
time will be set to 0.
Press the ENTER key to move on to the next
BACK/SEAT massage mode.
D) After
adjusting
NECK/SHOULDER; BACK/SEAT; LUMBAR and
FEET/CALVES, press and hold button M1 for 3
seconds to complete the programming procedure.
The Neck/shoulder, Back/seat, Lumbar massages
can be set to a maximum time of 10 minutes.
The Calf/Foot massage can be set to a maximum
time of 30 minutes.
28
Memorised programs
one
of
the
keys
enter
programming
to obtain the
height
detection,
the
massage
M1,
M2,
mode,
the
key
(19)
times
for
Publicité
Table des Matières
