• OPERATION
Start up
Plug the machine into the mains supply.
Set the switch to ON
Before sitting
Before sitting, make sure that the footrest is attached correctly to the chair frame.
Make sure that all of the components are in the default position. If not, switch the chair on again to reset all of the
positions.
WARNING
Do not sit on the chair with the footrest hanging.
To avoid damaging the footrest, do not suddenly drop full body weight on to it.
After use
After use, switch the chair off and unplug it from the mains supply.
To protect children from accidents and injuries, always make sure that the chair has been unplugged from the
electrical mains socket.
If the chair is not going to be used for prolonged periods, store it away.
How to store it:
First place the footrest into its lowest position, Fig.A, and the backrest fully up,
Fig.A.
Use the included cable to connect your audio device. Plug the elbow connector
(c) to monitor (a). Make sure the washer (b) is placed at the end (c). Connect the
free end of the cable to the output of your audio player.
24
Fig.A