BH FITNESS VENICE Instructions De Montage Et Utilisation page 25

CONTROL PANEL FUNCTIONS.
KEYS AND BUTTONS.-
1.-
Start/Stop.
Start/Stop control key.
The chair is in the standby position.
Press this key once and the backlight on the control
panel will begin to flash, inclining the backrest to 60º
and legrest.
Press any massage function key to start the chair's
massage functions.
Press the control button again to stop all of the
massage functions and the massage rollers will
return to their original position. Wait a few seconds
before restarting.
After 4 minutes the control panel will switch to
standby mode. To reactivate the monitor press the
key on the control panel.
2/3.-
Recline/Raise backrest and
legrest.
Control keys to adjust the angle of the backrest and
the massage chair's legrest support.
These two control keys can be used to adjust the
recline and elevation angle of the backrest and
legrest together.
Press the key once to move the backrest and legrest
into a comfortable position.
Press the key again to stop adjusting the backrest up
and legrest lift functions.
4/5.-
Legrest lift/incline keys.
Legrest angle adjust keys.
These two control keys can be used to adjust the
massage angle of the legrest.
Press the key once to move the legrest into a
comfortable position.
Press the key again to stop adjusting the legrest lift
functions.
6/7.-
Footrest length adjustment key.
These two keys are used to adjust the length of the
footrest.
Press the key once to set the footrest to a
comfortable length.
Press the key again to stop adjusting the length.
CAUTION:
The overall length increases when extending the
length of the footrest with the legrest raised.
Set the length of the footrest to minimum before
lowering the legrest.
This chair has an automatic mechanism that retracts
the footrest when it touches the floor.
8.-
SCAN
Auto-scan control key.
This chair features a scan function which adjusts the
massage position depending on the height of the
user in order to achieve a more effective massage,
shown on the display silhouette.
Each time this button is pressed, the chair begins to
explore the user's back and legs to detect the best
massage position for the user.
Manual up/down control keys.
To provide a more comfortable massage, the user
can adjust the height of the massage rollers by
pressing these keys after using the scan program.
The massage rollers will move up or down depending
on how these keys are pressed to achieve the most
suitable position.
Note: This manual up/down keys can also be used in
the stored programs for selecting different methods of
massage.
25