Step 5:
Install the DVD player control panel support (1), Fig.5.
Line up the holes on the control panel support and the armrest, use
two screws (2) to secure it.
Step 6:
Fitting the cover to the backrest Fig 6.
1) Close zip (U), located at the top of the backrest,
Fig.6A.
2) Attach the headrest using the clips (V) to the
backrest protective cover Fig.6B.
Checking the backrest cushion
Lift the vibration damper pad to inspect the backrest cushion.
•
If you detect any holes or cracks, stop using the chair and get in touch with your technical assistance service
•
for immediate repair.
Surroundings
To prevent the risk of electric shock do place the chair in a bathroom or damp places.
Do not place the chair near heaters or heating appliances as this could cause a fire or damage the leather
upholstery.
Earth connection
The product corresponds to electric appliance class I. Be sure to check the earth connection to prevent electrical
leakage or any accidents during use.
Movement and relocation
The assistance of a second person is advisable.
Use both hands to lift the front of the footrest, tilting the chair back on the
two wheels, as shown in the diagram.
surfaces; the chair is heavy so be very careful when moving it.
To prevent it from toppling over make sure there is nothing or nobody on
the chair when moving it.
Move the unit over smooth
23
Fig.5
Fig.6
.