BH FITNESS VENICE Instructions De Montage Et Utilisation page 22

Step 2: Fig.2
Attach the connection bar (A) and the
clevis bracket (B) for the recline actuator
using the flat head clevis pin (C), and
secure it with the split pin (D), as shown in
Fig.2.
A. Connection bars (for the backrest).
B. Clevis bracket for the recline actuator
(below the seat).
C. Flat head clevis pin.
D. Split pin.
Step 3:
Unfolding the backrest.- Fig.3
Unfold the chair from position (1) to
position (2) so that you hear the
safety lever (A) click into place.
This sound means that the backrest is
in the correct safety position.
To fold the unit, follow these steps in
reverse.
First, press the lever (A) and then
move from position (2) to position (1),
making sure there are no obstacles
that will prevent it from folding.
Step 4: Fig.4
1).- Connect terminal (1) to connector (2), matching the
colour, Fig.4. otherwise this could damage the chair.
3).- Connect terminal (3) to connector (4), matching the
colour, otherwise this could damage the chair.
22