BH FITNESS VENICE Instructions De Montage Et Utilisation page 26

9.-
PAUSE
When the chair is in massage mode the user can
press this key to pause the massage function. The
"Pause" icon on the LCD screen will flash and the
timer clock will stop.
The chair is now in the standby mode. Only the
backrest up, raise leg, lower leg movements can be
used while in Pause mode.
Press the Pause key again to resume the massage
function and the timer countdown.
10.-
TIMER/ENTER.
Timer settings.
The default massage time is 15 minutes.
Each time the TIMER key is pressed the timer setting
will change, the
"15>20>25>30>5>10" minutes.
One minute before the selected time has elapsed, the
backlight on the control panel will light up followed by
5 beeps to alert the user.
Note: This key can also be used to confirm the
selected time setting in the stored programs.
11.-
ZERO-G
The new zero gravity system positions the chair seat
to 40 degrees, along with the backrest and the
legrest, as a result, the body's weight is distributed
evenly in the massage chair making it possible for the
human body to enter a state of zero gravity, which
provides the most sensational yet comfortable
experience during massage.
Press this key to activate the Zero-G function.
Press the key again to deactivate it.
12.-
HEAT
Heat function On/Off key.
Press this key once to switch on the lower back heat
function.
Press the key again to switch it off.
13.-
VIBRATION (seat)
Seat vibration On/Off key, shown on the display
silhouette.
Press the Vibration key once to switch on vibration.
Press it again to switch it off.
MANUAL MODE.-
Lift the left-hand cover
on the control panel.
The manual keypad for
the various massage
modes is located at the
top and the air pressure
setting keys are at the
bottom.
sequence being
26
27.-
KNEADING
Kneading function On/Off key.
Press the Kneading key once to switch on the full
back massage mode,
silhouette. Press again to switch it off.
28.-
TAPPING
Tapping function On/Off key.
Press this key once to switch on the tapping function
for a full back massage at medium speed, shown on
the display silhouette. The speed can be adjusted
using the SPEED key.
Press the Tapping key again to switch it off.
29.-
DUAL ACTION
Kneading + Tapping function On/Off key.
Press this key once to switch on the kneading +
tapping function for a full back massage at medium
intensity, shown on the display. The intensity can be
adjusted using the INTENSITY key and the speed
using the SPEED key.
Press the DUAL ACTION key again to switch it off.
30.-
ROLLING
Roller function On/Off key.
Press this key once to switch on the roller function for
a full back massage. Press the WIDTH key to select
one of the three roller massage width settings, shown
on the display.
Press the ROLLING key again to switch it off.
This function cannot be used for a spot massage.
31.-
SPEED
Speed setting key for kneading and dual action
modes.
After switching on the dual action massage function,
each time this key is pressed the cycle speed will be
adjusted.
32.-
WIDTH
Roller massage mode width setting key.
After switching on the kneading, rolling or dual action
massage function, each time this key is pressed the
width will be adjusted.
33.-
INTENSITY.
Kneading intensity adjustment key.
After switching on the kneading function, each time
this key is pressed the intensity will be adjusted.
shown on the display