Pitch Slider; Pitch-Bend Buttons; Pitch-Bend Function With The Jog Wheel; Brake Function - Renkforce CD DJ CMP-960USB Notice D'emploi

• Using the JOG wheel (4). Select the function "PITCH-BEND" for the JOG wheel with the button JOG MODE (22).
By turning the wheel, you can change the speed temporarily. The speed change depends on how quickly the JOG
wheel is turned. This function can also be used when two tracks have the same beat but the starting point has to
be synchronised.

PITCH slider

• The PITCH sliding controller (9) can only be used when the PITCH button (15) lights on. Press and hold the button
PITCH (15) until this lights up.
• Select the max. control area for the slider with the PITCH button (15) (4% / 8% / 16%). The control area selec- ted
briefly appears in the display.
• Modify playback speed by moving the PITCH slide control (9) up or down. The percentage of the speed devia- tion
is displayed in the LC display. Put the slide control in centre position for original speed.
• Press and hold the button PITCH (15) until this turns off. With the PITCH sliding controller (9) the playback speed
cannot be controller any longer.

PITCH-BEND buttons

• Keep the respective PITCH BEND (16 or 17) button depressed during playback to alter the speed by up to +/- 16%.
The PITCH BEND - button reduces speed.
The PITCH BEND + button increases speed.
• The amount that the playback speed is altered depends on the length of time that the respective PITCH BEND
button is kept depressed.
• When the button is released, the music is played at original speed or at the speed specified by the PITCH slide
control (9).

PITCH-BEND function with the JOG wheel

• Select the function "PITCH-BEND" for the JOG wheel with the button JOG MODE (22).
• The playback speed change depends on the rotating speed of the wheel. The playback speed can be changed by
up to +/- 16%.
• Turn the wheel to the right to increase speed. Turn the wheel to the left to reduce speed.

BRAKE Function

The BRAKE function makes the track start or stop slowly after the PLAY/PAUSE button (3) was pushed. This function
simulates the start or stop of a record.
• Push the button BRAKE (19) to activate or deactivate this function. The button lights up when the BRAKE function
is activated.
44