Inserting Usb Memory Stick; Inserting The Sd Memory Card; Selecting The Playback Source; Play/Pause - Renkforce CD DJ CMP-960USB Notice D'emploi

Inserting USB Memory Stick

Due to the great variety of systems with USB interfaces, their different technical data (e.g. reading speed) and their
different functions, some of which are producer-specific, we cannot guarantee that all media will be recognized and
that all the operational functions are available on this device. Therefore, only use USB memory sticks.
• Insert the USB memory stick into the USB input (27).
The device can read USB memory stick (USB 2.0) with a storage capacity of no more than 8GB. The USB
memory stick must be formatted in FAT 32.
If the USB memory stick is not recognised anyway, use a USB memory stick of another manufacturer.
Switch off the CD player or switch to CD/SD playback to remove or replace the USB memory stick. Never
remove the USB memory stick from the USB input during playback. Data on the USB memory stick may
be destroyed by this. There is a danger of the USB memory stick being no longer readable because of this.
We assume no liability of possible data loss.

Inserting the SD Memory Card

• Insert the SD card into the SD card reader (31). Push the SD card until it latches audibly. The metal contact surfaces
of the SD memory card must point downwards.
SD cards (up to 8GB / FAT32) or SDHC cards (max. 4GB / FAT32) may be used. If the SD memory card is
not recognised, use a SD memory card of another manufacturer or another SD memory card size.
Switch off the CD player or switch to CD/USB playback to remove or replace the SD memory card. Never
remove the SD storage card from the SD card slot during playback. Data on the SD memory card may be
destroyed by this. There is a danger of the SD memory card being no longer readable because of this. We
assume no liability of possible data loss.
• If you want to remove the SD memory card, push slightly onto the SD memory card until you can hear an audible
unlocking sound. The SD memory card can now be removed.

Selecting the Playback Source

• Select the playback source (USB / CD / SD).with the button SOURCE (32). The corresponding LED (28 / 29 / 30) for
the selected playback source lights up. The playback source can only be changed in pause mode.

Play/Pause

• Push the PLAY/PAUSE
pause mode, the button flashes.
• You can stop playback in two ways:
• Push the button PLAY/PAUSE
• During playback, push the CUE button (2). The device returns to the CUE mark and pauses.
40
button (3) to start playback. In playback, this button is continually lit. If the device is in
(3). The device switches to pause mode.