Sqv Final Assembly; Conformity - aquasant SQV Série Mode D'emploi

6.1.5

SQV final assembly

1. lightly coat spring and piston housing (seal faces) and seal rings with fine Food Grease
type 2 of Diamant.
2. insert piston rod into piston housing (compressed air chamber), insert new spring into spring housing
and screw both parts together; grease thread lightly
3. hose pinch valve is now ready for testing
Spring housing

7 Conformity

Conformity assessment procedure according to module A category I
CE conformity according to EN 62061 Category: 1 / EN ISO 13849 PL: a
ISO 9001:2015 CE
piston housing head section
OPERATING MANUAL
V20520/1
hinged cover
Seite 11