User S Setting; Alarm Clock - CBE PC320-CA Instructions D'emploi

USER S SETTING

'
To enter the set mode, press the "PROG
s
screen.
Select, by pushing the arrow keys ref. 1 and 2, the setting menu you want to operate and then confirm by
s
pushing the "PROG" button ref. 3;
- by selecting "CLOCK" you operate the menu to set only the parameters clock and alarm clock
- by selecting "SYSTEM" you operate the menu to set all parameters.
By using the arrow keys ref. 1 and 2 you can modify the setting of the parameters.
s
Confirm the setting by pushing the "PROG
s
Press the "PROG
s
To exit without saving wait 20 seconds without pressing any key.
s
clock
alm.clock
ON
alm.clock
" button (ref. 3) for more than 2 seconds from the main clock
" button (ref. 3), you then go automatically to next parameter.
" button (ref. 3) more than once to save the settings and exit the setting mode.
"CLOCK"
CLOCK

ALARM CLOCK

Clock setting
- HOURS (blinking)
- MINUTES (blinking)
Activation of alarm clock
- ON (activation)
- OFF (deactivation)
Set alarm clock time (only if alarm clock has been
previously activated)
- HOURS (blinking)
- MINUTES (blinking)
GB
GB
27