Users's Setting; Alarm Clock - CBE PC380-BS Instructions D'emploi

USER'S SETTING
To enter the set mode, press the PROG" button
s
(ref. ) for more than 2 seconds 6
clock screen.
Select, by pushing the arrow keys ref. 7 and 8, the
s
setting menu you want to operate and then
confirm by pushing the PROG button
- by selecting " CLOCK
the parameters clock and alarm clock
- by selecting "DISPLAY" you operate the menu to
set the display parameters.
- by selecting "SETTING" you operate the menu to
set the system parameters .
CLOCK MENU
CLOCK
clock

ALARM CLOCK

alm.clock
ON
alm.clock
"
from the main
" " (ref. ) 6 ;
" you operate the menu to set
By using the arrow keys ref. 7 and 8 you can
s
modify the setting of the parameters.
Confirm the setting by pushing
s
(ref. ) 6 , you then go automatically to next
parameter.
To abandon programming and save changes,
s
select "EXIT" and then choose to save or not save
changes.
To exit without saving wait 20 seconds without
s
pressing any key.
Clock setting:
- HOURS (blinking)
- MINUTES (blinking)
Activation of alarm clock:
- ON (a ctivation )
- OFF (deactivation)
Set alarm clock time (only if alarm clock has been
previously activated):
- HOURS (blinking)
- MINUTES (blinking)
EN
the PROG" button "
23