Users's Setting; Alarm Clock - CBE PC380-ST Instructions D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
USER'S SETTING
To enter the set mode, press the PROG" button
s
(ref. ) for more than 2 seconds
6
screen.
Select, by pushing the arrow keys ref. 7 and 8, the
s
setting menu you want to operate and then confirm
by pushing the PROG button
"
- by selecting "
CLOCK
the parameters clock and alarm clock
- by selecting "DISPLAY" you operate the menu to
set the display parameters.
- by selecting "SETTING" you operate the menu to
set the system parameters .
CLOCK MENU
CLOCK

ALARM CLOCK

20
"
from the main clock
"
(ref. )
6 ;
" you operate the menu to set
clock
alm.clock
ON
alm.clock
By using the arrow keys ref. 7 and 8 you can
s
modify the setting of the parameters.
Confirm the setting by pushing
s
(ref.
) 6 , you then go automatically to next
parameter.
To abandon programming and save changes,
s
select "EXIT" and then choose to save or not save
changes.
To exit without saving wait 20 seconds without
s
pressing any key.
Clock setting:
- HOURS (blinking)
- MINUTES (blinking)
Activation of alarm clock:
- ON (a
ctivation
)
- OFF (deactivation)
Set alarm clock time (only if alarm clock has been
previously activated):
- HOURS (blinking)
- MINUTES (blinking)
the PROG" button
"

Publicité

Table des Matières
loading

Table des Matières