Intended Use; Warranty & Liability; Environmental Protection Notice - Titan TP 500 Notice D'instruction

2.1. Intended use

This tool is meant for the strapping of packages, loads on pallets etc. The tool is
designed and manufactured for safe handling during the strapping operation.
This tool is intended for strapping with plastic strap material.
Unintended use!
Strapping material must not be used for the hoisting of loads; this strapping tool
may only be used as intended and specified above.
The use of steel straps is not allowed with this device.
The strapping tool TP 500 complies with the German and European safety
standards and is in accordance with EU Guidelines: see Declaration of
conformity of the machinery.
Standards applied and technical specifications:
See Declaration of conformity of the machinery
2.2. Warranty & liability
TITAN Umreifungstechnik GmbH & Co. KG guarantees all strapping tools sold by
the company for a period of 6 months. The warranty covers all defects that can
be demonstrated to result from faulty craftsmanship or defective materials.
Wear parts are excluded from the warranty.
Warranty and liability claims shall be excluded if they are due to one or more of the
following causes:
Misuse of the tool.
Incorrect assembly, commissioning, operation and maintenance of the tool.
Operation of the tool with improper safety and protective devices.
Failure to comply with the information in the operating manual.
Unauthorized structural modifications to the tool.
Missing serial number on the tool and/or its accessories.
Insufficient monitoring of tool parts that are subject to wear.
Improper repairs.

2.3. Environmental protection notice

No hazardous physical or chemical substances are used in the
manufacture of the devices. Comply with the applicable regulations for
disposal.
TP 500 II
!
H TP 500 II EU 04/12
25 / 70