Publicité
Les langues disponibles
Les langues disponibles
2.1. Intended use
The strap dispenser type BAZ-L was developed for the feed and cutting to length
of steel strap for dimensions between 10 – 32 mm.
The fitted cutter is made for cutting and cutting-off steel strap. The cutter is
designed and manufactured for safe handling during operations.
The cutter complies with the German and European safety standards and is
in accordance with EU Guidelines: see Declaration of conformity of the
machinery.
Standards applied and technical specifications:
see Declaration of conformity of the machinery.
2.2. Warranty & liability
TITAN Umreifungstechnik GmbH & Co. KG guarantees all dispensers BAZ-L sold
by the company for a period of 6 months. The warranty covers all defects that
can be demonstrated to result from faulty craftsmanship or defective materials.
Wear parts are excluded from the warranty.
Warranty and liability claims shall be excluded if they are due to one or more of
the following causes:
Misuse of the dispenser and the cutter.
Incorrect assembly, commissioning, operation and maintenance of the dispenser and the
cutter.
Operation of the dispenser and the cutter with improper safety and protective devices.
Failure to comply with the information in the operating manual.
Unauthorized structural modifications to the dispenser or the cutter.
Insufficient monitoring of tool parts that are subject to wear.
Improper repairs.
2.3. Environmental protection notice
BAZ-L
This dispenser BAZ-L is manufactured without any physical or
chemical substances which could be dangerous to health. For
disposal of all the parts, the governmental instructions must be
observed.
H 766 EU 37/13
Seite 12 von 34
Publicité
Chapitres
