Sibir KS 13010 Mode D'emploi page 36

Changing over the freezer
compartment door
1. Keep the freezer compartment door
closed. Using a screwdriver, remove the
mount screw for the installation button, and
take the installation button down.
2. Open the freezer compartment door
a little way. Pull down the freezer
compartment door and the cap which
covering on the up door bearing(1).
3. Using a screwdriver, take down the
installation buckle, and then fix it in the
opposite side.
4.Turn the freezer compartment door
through 180°, cover the cap on the up door
bearing, then fit the door into the up door
axle hole.
(1)
5. Keep the freezer compartment door
closed. Fix the installation button to the
lower door bearing, Press the installation
button to make it have no gap with the
cavity, then fix the screw.
Warning!
1. When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
2. Please use the screw hole covers to
decorate the screw holes in the original
installation position. The screw hole covers
can be find in the plastic packet
16
.