Efco 8245 SE Manuel D'utilisation Et D'entretien page 2

en
To correctly use the stick edger and prevent accidents, do not start work without having
first carefully read this manual. You will find explanations concerning the operation of the
various parts plus instructions for necessary checks and relative maintenance.
Note: Illustrations and specifications in this manual may vary according to
Country requirements and are subject to change without notice by the
manufacturer.
THE OPERATOR'S MANUAL
Your operator's manual is for your protection. READ IT. Keep it in a safe place for
reference. Know what you are doing before you begin assembly of the unit. Proper
preparation and upkeep go hand-in-hand with satisfactory performance of the stick
edger and safety.
Contact your dealer or the distributor for your area if you do not understand any of the
instructions in this manual.
In addition to the operating instructions, this manual contain paragraphs that require
your special attention.
Such paragraphs are marked with the symbols described below:
Warning: where there is a risk of an accident or personal injury or serious damage to
property.
Caution: where there is a risk of damaging the machine or its individual components.
WARNING - To ensure safe and correct operation of the
stick edger, this operator's manual should always be kept with or
near the machine. Do not lend or rent your stick edger without
the operator's instruction manual.
WARNING: Allow only persons who understand this manual to
operate your stick edger.
2
INTRODUCTION