Technical Data; Functional Description; Intended Use - Festool SHINEX RAP 150 FE Guide D'utilisation

Safety Warnings Specific for Polishing Operations
– Do not allow any loose portion of the polishing
bonnet or its attachment strings to spin freely.
Tuck away or trim any loose attachment strings.
Loose and spinning attachment strings can en-
tangle your fingers or snag on the workpiece.
– Prevent liquid polish from entering the ma-
chine. The penetration of liquid polish into the
electric power tool increases the risk of an elec-
tric shock.
Health hazard by dust
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
The machine is designed for polishing painted sur-
faces. To guarantee electrical safety, the machine
must not be damp or operated in a damp environ-
ment.
SHINEX RAP 150 FE
Power
Voltage
Speed
Max. speed
Polishing pads
up to
Weight (without mains cable/
polishing pad)
Safety class
1.
Max. possible speed with faulty electronics.
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Spindle stop
[1-2] Speed control
[1-3] Locking button
[1-4] On/Off switch
[1-5] Lint filter
[1-6] Additional handle
[1-7] Polishing pads

Intended use

The user will be liable for damage due to improp-
er use.

Technical data

1
dia. 150 mm (5.9 in.)

Functional description

WARNING
10 A
~120 V, 60 Hz
400 - 2100 rpm
3000 rpm
2.1 kg (4.6 lbs.)
/II
9