MASTER SECTION
27. TAPE LEVEL
This knob changes the volume level of
the TAPE IN if this input is connected.
Turn cw to increase the level and ccw to
reduce it
28. AUX 1-2 SENDS
This knob changes the volume level of
the AUX Send if this output is connected.
Turn cw to increase the level and ccw to
reduce it
29. AUX RETURN 1-2
This knob changes the volume level of
the AUX Return input signal. Turn cw to
increase the level and ccw to reduce it
30. ST/G1-2
If this switch is not pressed, the return
signal will be sent to the stereo output. If
the switch is pressed in, the return signal
will be sent to the G1-2 output.
31. ST/G1-2
If this switch is pressed, the G1-2 mix
output signal is sent to the stereo bus.
Thus the G1-2 busses can mix two mono
subgroups into a single output signal
when no stereo sound is required.
32. GRPS 1-2 OUTPUT FADER
This slider control sets the volume level
of the G1-2 bus.