EdilKamin NEA AirTight 8 CRISTAL N Installation, Usage Et Maintenance page 25

CAST-IRON COMBUSTION CHAMBER ASSEMBLY – OPTIONAL
The kit for replacing the Vermiculite combustion chamber
with a cast-iron combustion chamber is supplied in cardboard
packaging, and consists of 2 cast-iron side elements, right/left
(D – fi g. 3)
To fi t proceed as follows:
Fig. 1-2
Open the door, take out the crucible, remove the Vermiculite
ceiling (A) and slide out the fi xing pins (B) from the Vermiculi-
te side elements (C).
Fig. 3
A
Replace the Vermiculite side elements (A) with the cast-iron
side elements (B).
To fi x, use the fi xing pins (B) previously removed.
fi g. 1
Reposition the Vermiculite ceiling (A) and the crucible pre-
viously removed.
B
C
fi g. 2
B
D D
fi g. 3
- 25
-