Warning against misuse
Do not operate the device outside the conditions specified by the
manufacturer, as this might result in hazards to operators or malfunction
of the equipment.
Caution
The system installer is responsible for the safety of the system in which
the device is integrated.
3.
Configuration
3.1 Tools
A screwdriver with a width of 3 mm is required to open the unit and
to connect the wires to the screw clamp terminals.
3.2 Opening the unit
Disengage the top part of the housing on
both sides using the screwdriver.
Pull out the top part of the housing and
the electronics section until they lock.
15