Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Mounting
The standard-signal isolators are mounted on standard TS 35 rails.
5.
Electrical Connection
Terminal assignments
1 Input + current
2 Input – current
3 Input + voltage
4 Input – voltage
5 Output +
6 Output –
7 Power supply
8 Power supply
Conductor cross-section max. 2.5 mm
Multi-wire connection max. 1 mm
(two wires with equal diameters)
AWG 30-12, tightening torque 0.7 Nm
The connected cable must be suitable
for a temperature of at least 75 °C.
Caution!
Do not operate inputs for current and voltage simultaneously!
For applications with high working voltages, take measures to prevent
accidental contact and make sure that there is sufficient distance or insulation
between adjacent devices!
2
2
17
Publicité
Table des Matières
