Everest Printer Switches; Mode Switch - Rimage Everest Manuel D'utilisation

Rimage Everest Printer

Everest printer switches

There are two switches on the
rear of the Everest printer: the
mode switch and the AC voltage
switch.

Mode switch

Important! You must power off the Everest printer before changing the mode switch.
The mode switch is a rotary switch used to set the operational mode of the Everest printer. The
printer must be powered off for the mode to be changed. After changing the mode, the printer
must be powered on again to recognize the change. The recessed line on the switch indicates the
selected mode.
Important: The mode switch must be set to match your equipment type.
Switch Position
0 Everest standalone
1 Rimage autoloader
2 AutoPrinter
3 Diagnostic
4 Firmware update
5 – 9 Reserved
AC voltage switch
The AC voltage switch is used to select the AC voltage of the power outlet.
Warning! Set the AC voltage switch to match the AC voltage of the AC power outlet!
6
Mode
Mode switch
Voltage switch
Mode Switch
110632_L