Setting The Printable Area - Rimage Everest Manuel D'utilisation

Setting the printable area

This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm
media. This allows you to set the outer and inner diameters to print the disc label without
overlapping the disc edges.
Tip: Most discs like the
one shown above have the
following printable areas:
Standard Area
Outer Diameter 118 mm
Inner Diameter 38 mm
Hub Area
Outer Diameter 35 mm
Inner Diameter 24 mm
Tip: Most discs like the
one shown above have the
following printable areas:
Outer Diameter 118 mm
Inner Diameter 24 mm
110632_L
1. Navigate to printing preferences (refer to page 15).
2. From the presets pane popup menu select Printable Area
Settings. The Printable Area Settings pane displays.
3. View or change the printing preferences.
a. To increase or decrease the printable area, enter the
desired values in the Outer and Inner fields.
b. To set the printable area for a disc with a stacking ring,
select Advanced. The advanced settings display.
i. To print on the inner hub of the disc, select Print
on Hub.
ii. In the Outer Hub and Inner Hub fields, enter the
desired settings.
4. When you have made the desired choices, select Print.
Operate the Everest printer
17